A sample (A) is attached to the tilt stage. And the other sample(B) is attached to the contact. (fixing sheet by binding and solid by both sides label.) Set the contact on the tilt stage so that the sensor pole pass the sensor section. Then, tilt the stage and detect the angle just the contact starts sliding, and convert it into a coefficient of static friction.

Operation of the SF-2 is as simple as below.
1) Turn the power switch on.
2) Attach samples on the contact and the tilt stage.
3) Press MEAURE switch.
4) The SF-2 detects the moment that the contact starts sliding, then coefficient of static friction is displayed on the LED.

Applications

• Effects of polishing and waxing on car body
• Friction of the fabrics on different weaving direction
• Evaluation of transporting performance of papers in photocopier or printer
• Friction between sheet belt and cloth
• Evaluation of stickness with hair conditioner aand hair spray
• Evaluation of the touch of interior surface of cars
• Evaluation of sliding condition of floor
• Study of variation of friction effected by static electricity
• Seizing coefficient of static friction with lubricant or surface treatment.

SF-2 is also applicable to metals, glasses, paper, films, wood, ceramics, cosmetics, rubber and various treated surface.